Checking whether girder longitudinal slope is applied
첨부된 상부슬래브 일반도와 같이 거더를 배치하고 싶은데요 선형에 종곡선을 먹은상태라 거더부 꺽인 각도 길이만큼 차이가 나는데요. 거더 배치탭에서 종단경사를 고려해서 배치하여도 동일한 문제가 발생합니다. 첨부된 파일 3번째 엑셀쉬트에 있는 좌표값이 상부업체 abeamdeck에서 추출한 좌표값이니. .종단경사 적용방법에 대해 답변부탁드립니다.
Answer
안녕하세요. 한길아이티입니다. 일반도에 작성된 제원으로보아서는 종단경사 및 종단곡선을 고려하지 않은 것으로 판단됩니다. 종단경사가 고려되면 기본적으로 거더길이는 짧아지는데 교량길이가 50(유간)+50(슬래브)+29900(거더)+50(슬래브)+30(유간) = 30.080 로 거더길이에 종단경사가 고려되지 않은 것 같습니다. 횡단구성에서 [거더경사 거더적용]옵션을 해제하시고 거더배치에서 [거더 시종점 기울기 적용]의 모든 옵션을 해제하신후 [거더자동배치]하시면 종단경사가 제외된 배치가 됩니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #205532 | Seismic analysis of single-span bridges | 48 | 2007-07-31 |
| Answered | AAbutPier | #205530 | Seismic load error | 22 | 2007-07-31 |
| Answered | AAbutPier | #205517 | Question about main rebar on parapet back face | 20 | 2007-07-30 |
| Answered | AAbutPier | #205511 | Seismic analysis error | 50 | 2007-07-30 |
| Answered | AAbutPier | #205498 | Question 12 | 64 | 2007-07-27 |
| Answered | AAbutPier | #205494 | Seismic analysis error | 36 | 2007-07-27 |
| Answered | AAbutPier | #205504 | About rebar ratio check | 30 | 2007-07-27 |
| Answered | AAbutPier | #205502 | Rebar material schedule | 113 | 2007-07-27 |
| Answered | AAbutPier | #205501 | Combined member force check for columns | 79 | 2007-07-27 |
| Answered | AAbutPier | #205500 | Shear check section location and bearing reinforcement rebar | 33 | 2007-07-27 |
| Answered | AAbutPier | #205496 | Shear check of foundations | 80 | 2007-07-27 |
| Answered | AAbutPier | #205488 | "Internal application error" | 37 | 2007-07-27 |
| Answered | AAbutPier | #205483 | Effective length factor and response modification factor | 73 | 2007-07-26 |
| Answered | AAbutPier | #205465 | Question about brx | 69 | 2007-07-26 |
| Answered | AAbutPier | #205451 | Question | 22 | 2007-07-25 |
| Answered | AAbutPier | #205426 | Rebar detail error in wall pier coping | 55 | 2007-07-24 |
| Answered | AAbutPier | #205436 | Question 11 | 52 | 2007-07-24 |
| Answered | AAbutPier | #205416 | Modeling error occurs | 21 | 2007-07-24 |
| Answered | AAbutPier | #205424 | Question 10 | 16 | 2007-07-24 |
| Answered | AAbutPier | #205418 | Question about skewed abutment | 29 | 2007-07-24 |