Corner and inner tension rebar error
첨부파일에 보시면 4종류의 암거를 설계중입니다. 4종류 모든 암거 다 검토 부탁드립니다. 1. 내측인장 철근을 배근했음에도 불구하고 사용철근량이 0으로 나오면서 NG 2. Skew가 고려가 안된 단면임에도 불구하고 우각부 1단 위치가 좌우가 다르게 나옵니다.(R1,R2가 배치가 다르게 표현됨)
Answer
안녕하세요. 한길아이티입니다. 1. 2D frame 해석후 다음다음 클릭하여 철근 제원까지 가서 전체 기본값 클릭후 스터럽 철근에 대한 내측인장에 대한 검토를 다시 확인 하여 보시기 바랍니다. 2. 수정후 패치 하여 드리겠습니다. 감사합니다.
Answer
안녕하세요. 한길아이티입니다. 2. 단절점부 철근의 배치에 오류가 확인되어 수정하였습니다. 패치후 정상적으로 적용됩니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | ACulvert | #196120 | Ground reaction (BxL) | 44 | 2005-11-17 |
| Answered | ACulvert | #196047 | Main rebar design check | 11 | 2005-11-15 |
| Answered | ACulvert | #195723 | Correction request | 20 | 2005-10-31 |
| Answered | ACulvert | #195545 | Standard cross-section drawing | 12 | 2005-10-24 |
| Answered | ACulvert | #195382 | Abnormal lap splice length and quantity calculation not working | 33 | 2005-10-17 |
| Answered | ACulvert | #193933 | Question about wing walls | 23 | 2005-08-12 |
| Answered | ACulvert | #193937 | Plan view | 5 | 2005-08-12 |
| Answered | ACulvert | #193360 | File | 17 | 2005-07-16 |
| Answered | ACulvert | #192582 | Pedestrian culvert program error | 23 | 2005-06-14 |
| Answered | ACulvert | #192418 | Inquiry about wing walls | 31 | 2005-06-08 |
| Answered | ACulvert | #191641 | Please review | 39 | 2005-04-23 |
| Answered | ACulvert | #191511 | Shouldn't the corner reinforcing rebar detail be changed? | 34 | 2005-04-15 |
| Answered | ACulvert | #191504 | Buoyancy check looks wrong | 26 | 2005-04-15 |
| Answered | ACulvert | #189303 | Data attached, please check | 14 | 2004-11-25 |
| Answered | ACulvert | #189017 | ACulvert trial version | 34 | 2004-11-09 |
| Answered | ACulvert | #188979 | Please check error in seismic case | 28 | 2004-11-06 |
| Answered | ACulvert | #188574 | Main rebar input and design check | 18 | 2004-10-19 |
| Answered | ACulvert | #187045 | Error when printing structural calculation report | 11 | 2004-07-19 |
| Answered | ACulvert | #185899 | sap2000 stops with an error while running | 23 | 2004-05-25 |
| Answered | ACulvert | #185377 | Program does not run | 68 | 2004-04-01 |