Pier input > Design options > Applying (-) sign when considering soil cover inertial force
교각입력>설계선택사항>토피관성력 고려시(-)부호 적용에 대한 설명이 메뉴얼이나 FAQ에 없어서 문의드립니다. 토피관성력 고려시(-)부호 적용은 1.어떤 상황을 반영하기 위한 옵션인지와 2.적용시와 미적용시의 차이점을 알고싶습니다.
안녕하세요. 한길아이티입니다. 일반적인 교각의 경우는 기둥과 기초, 말뚝의 중심이 동일하며 이 경우는 기둥하단 단면력과 기초에 작용하는 토피 및 기초의 자중, 관성력 등을 최대단면력이 발생하도록 합산하여 적용하고 기초 단면의 좌우측 중 큰 단면력이 큰쪽만 검토하면 됩니다. 그러나 기둥과 기초, 말뚝의 중심이 동일하지 않은 경우라면 기둥의 편심으로 인해 모멘트가 추가로 발생하고 기둥하단 단면력과 하중방향을 고려하여야 할 수 있습니다. 또한 기초 단면의 경우도 좌우측 중 어느쪽이 불리할지 알 수 없으므로 양측의 검토를 모두 수행하여야 합니다. 이러한 경우 하중의 방향에 따라 지진하중 단면력의 (-)부호를 적용하여야 할 수 있고 토피관성력도 (-)부호를 적용하여야 할 수 있습니다. 이 때 적용이 필요한 옵션이며 적용시에는 (-)단면력으로 집계되어 기초검토가 진행됩니다. 기둥과 기초, 말뚝의 중심이 동일한 경우는 적용이 필요하지 않습니다. 기초 및 말뚝과 기둥중심이 상이할 경우의 메시지 및 검토에 대한 FAQ를 첨부하니 참고하시기 바랍니다. [개인정보] 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #201095 | Seismic analysis modeling? | 42 | 2006-11-16 |
| Answered | AAbutPier | #201093 | Error applying the pier cap edge angle? | 41 | 2006-11-16 |
| Answered | AAbutPier | #201090 | Please check superstructure and substructure coordinates | 47 | 2006-11-16 |
| Answered | AAbutPier | #201084 | Drawings are not generated | 40 | 2006-11-16 |
| Answered | AAbutPier | #201083 | Girder slope and other issues | 54 | 2006-11-16 |
| Answered | AAbutPier | #201082 | Question about wing walls | 41 | 2006-11-16 |
| Answered | AAbutPier | #201080 | Problem generating reinforcement drawings | 66 | 2006-11-16 |
| Answered | AAbutPier | #201077 | Plastic analysis | 50 | 2006-11-15 |
| Answered | AAbutPier | #201085 | Abutment skew | 55 | 2006-11-15 |
| Answered | AAbutPier | #201071 | How to enter the pier section? | 46 | 2006-11-15 |
| Answered | AAbutPier | #201074 | Suggestions | 62 | 2006-11-15 |
| Answered | AAbutPier | #201073 | About the rebar ratio check | 69 | 2006-11-15 |
| Answered | AAbutPier | #201069 | Superstructure type | 55 | 2006-11-15 |
| Answered | AAbutPier | #201066 | Please check the input fields | 50 | 2006-11-15 |
| Answered | AAbutPier | #201060 | Analysis of piles and bearing seat | 51 | 2006-11-15 |
| Answered | AAbutPier | #201054 | Please review the maximum rebar ratio check | 62 | 2006-11-14 |
| Answered | AAbutPier | #201064 | Load combinations for abutment stability check | 68 | 2006-11-14 |
| Answered | AAbutPier | #201058 | About an equation in the cast-in-place pile report | 67 | 2006-11-14 |
| Answered | AAbutPier | #201050 | About vertical clearance at the bearing seat | 52 | 2006-11-14 |
| Answered | AAbutPier | #201048 | Please review | 42 | 2006-11-14 |
