Skip to content
AnsweredAAbutPierQ&A #1270812014-06-13 13:59 · Views 185

About the effective length factor K

유효길이 K에 대하여 Default값으로 교축방향-1, 교축직각방향-2로 적용하셨는데 도로교설계기준(2010) 3-13,에서는 이론값으로 1,2 설계값으로 1.2,2.1로 적용하라고 되어 있는데 default값으로 1,2로 쓴 이유가 있나요 잘몰라서..........

Attached images 1
Answer

안녕하세요. 한길아이티입니다. 유선상으로 답변드렸습니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#195959About cast-in-place pile drawings612005-11-10
AnsweredAAbutPier#195956Load diagram in foundation design looks wrong102005-11-10
AnsweredAAbutPier#195950P-M interaction diagram under seismic load452005-11-09
AnsweredAAbutPier#195949Question about slab configuration452005-11-09
AnsweredAAbutPier#195925Bearing seat rebar quantity looks wrong222005-11-09
AnsweredAAbutPier#195923Pile placement282005-11-09
AnsweredAAbutPier#195918About direction indicators212005-11-09
AnsweredAAbutPier#195917Tie rebar details for track-shaped columns1072005-11-09
AnsweredAAbutPier#195915Please check single-span seismic design542005-11-09
AnsweredAAbutPier#195958Shoring and scaffolding quantity calculation542005-11-09
AnsweredAAbutPier#195941Question about wing wall length182005-11-09
AnsweredAAbutPier#195921Rebar length error302005-11-09
AnsweredAAbutPier#195914Dead load and pile length262005-11-09
AnsweredAAbutPier#195912In the wing wall reinforcement drawing232005-11-09
AnsweredAAbutPier#195906Please review the pile check82005-11-09
AnsweredAAbutPier#195904Average N-value at pile tip232005-11-09
AnsweredAAbutPier#195913Inquiry about the calculation report382005-11-08
AnsweredAAbutPier#195910P-M interaction diagram output error412005-11-08
AnsweredAAbutPier#195907Bearing specification error112005-11-08
AnsweredAAbutPier#195901Rebar is not displayed on the drawing322005-11-08
Sign in to ask