Pier ductility design
연성도 설계 적용시 R값이 1로 반영되어 탄성설계 값과 같음
Answer
안녕하세요. 한길아이티입니다. 질의하신 사항에 대해서 검토를 진행하였습니다. 말씀하신 교각의 경우에는 소요연성도가 1.0 이 되지 않는 경우였습니다. 소요연성도가 1이 넘어야 연성도 설계를 진행하게 되는데, 첨부하신 교각의 경우에는 연성도 설계에 적합하지 않은 것으로 판단되고 있습니다. 해당 문구를 다르경우로 변경하여 기존의 소성설계로 진행할지의 여부를 검토하였으나, 연성도 설계를 진행하지 않고, 탄성설계로 진행하는것이 더 타당하다는 판단을 진행하였습니다. 해당 단면은 교각의 탄성설계를 진행하시거나, 단면을 줄이고 철근량을 줄여서 연성도 설계로 진행하는것이 보다 타당할수 있을것이라고 판단됩니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #193883 | Bearing capacity check including MAA applied forces | 39 | 2005-08-10 |
| Answered | AAbutPier | #193871 | Please check | 36 | 2005-08-10 |
| Answered | AAbutPier | #193869 | Hollow column | 41 | 2005-08-10 |
| Answered | AAbutPier | #193863 | Something odd in the design check | 26 | 2005-08-10 |
| Answered | AAbutPier | #193884 | Wave pressure and buoyancy | 42 | 2005-08-10 |
| Answered | AAbutPier | #193879 | Foundation bearing capacity check | 46 | 2005-08-10 |
| Answered | AAbutPier | #193877 | Moment magnification | 54 | 2005-08-10 |
| Answered | AAbutPier | #193873 | How do I enter the alignment when designing a pier? | 47 | 2005-08-10 |
| Answered | AAbutPier | #193856 | Please check coping reinforcement detailing | 69 | 2005-08-10 |
| Answered | AAbutPier | #193847 | About seismic analysis | 36 | 2005-08-09 |
| Answered | AAbutPier | #193861 | Review comments | 58 | 2005-08-09 |
| Answered | AAbutPier | #193832 | Cannot enter second-layer main rebar in abutment footing heel | 41 | 2005-08-09 |
| Answered | AAbutPier | #193829 | Drawing output looks wrong | 21 | 2005-08-09 |
| Answered | AAbutPier | #193828 | Request to add earthwork when installing abutment retaining walls | 52 | 2005-08-09 |
| Answered | AAbutPier | #193820 | Lap splice length of wall main rebar | 24 | 2005-08-08 |
| Answered | AAbutPier | #193817 | Question about abutment protection block quantity | 46 | 2005-08-08 |
| Answered | AAbutPier | #193811 | Internal program error | 28 | 2005-08-08 |
| Answered | AAbutPier | #193806 | Internal application error | 24 | 2005-08-08 |
| Answered | AAbutPier | #193804 | Error when outputting abutment calculation report | 16 | 2005-08-08 |
| Answered | AAbutPier | #193809 | About wind load | 31 | 2005-08-08 |