Skip to content
AnsweredACulvertQ&A #2266242005-09-14 22:22 · Views 39

Unit notation error

(2) 2차선 재하시 Pn = 4 × P × ( 1 + i ) / L Pr = 4 × 72.0 × ( 1 + 0.300 ) / 6.474 = 57.831 kN/m Pf = 4 × 18.0 × ( 1 + 0.300 ) / 6.474 = 14.458 kN/m (단위 : kN/m) 구분 1차선 재하 2차선 재하 비고 Pr 5.389 5.783 DB-18 Pf 1.347 1.446 DB-18 ==============>> 단위가 kN/m라고 표현되어있는데, 윗줄은 57.831과 14.458 아랫표에서는 5.783과 1.446 으로 표기가 오류가 납니다. 하중계산입니다...

Answer

안녕하세요. 한길아이티입니다. 오류를 확인하였습니다.수정후 패치에 적용토록 하겠습니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredACulvert#268543Pile calculation report3292026-09-28
AnsweredACulvert#268536Setting section changes in culvert1712026-09-28
AnsweredACulvert#268524Design check not performed at wall center2152026-09-27
AnsweredACulvert#268523Applying moving vehicle loads2352026-09-27
AnsweredACulvert#268522Question about pile layout2612026-09-23
AnsweredACulvert#268521Question about features1302026-09-23
AnsweredACulvert#268510Question about joint check in Excel report output1842026-09-22
AnsweredACulvert#268499Error in STM analysis of corner region1422026-09-22
AnsweredACulvert#268471Launching the culvert program592026-09-18
AnsweredACulvert#268442All lines are displayed as dashed lines, what should I do?1392026-09-17
AnsweredACulvert#268429Question about U-type underpass1262026-09-17
AnsweredACulvert#268424Load position when applying railway loads to an underpass2352026-09-17
AnsweredACulvert#268417Changing girder dimensions1522026-09-17
AnsweredACulvert#268396Incorrect section check location for horizontal rebar1802026-09-16
AnsweredACulvert#268376Question about segment settings for U-type retaining wall1902026-09-15
AnsweredACulvert#268343Question about culvert drawing output1282026-09-15
AnsweredACulvert#268337Inquiry about checking retaining-wall-type wing walls3042026-09-14
AnsweredACulvert#268330About drawing output1522026-09-14
AnsweredACulvert#268318Some blocks not displayed1382026-09-14
AnsweredACulvert#268317Tank load for surcharge and moving loads3372026-09-14
Sign in to ask