Deflection check
▣ 철근콘크리트 부재의 처짐은 시방서에서 규정한 부재의 최소두께를 고려하여 간접적으로 제한한다. - 경계조건 - 지 간 - fy = 3000 kgf/㎠ - 부재두께(T) = 100.00 cm ▣ 처짐계산을 하지 않는 경우의 휨 부재의 최소두께 ( fy = 4000 kg/㎠ 인 경우 ) 부재 1방향 슬래브 1보 Tmin = L / 28 × (0.43 + fy / 7000) T = 950.000 / 28 × (0.43 + 3000 / 7000) T = 29.130 cm O.K ------------> fy값이 3000으로 입력을 시켰는데, 중간에 "처짐계산을 하지 않는 경우의 휨 부재의 최소두께 ( fy = 4000 kg/㎠ 인 경우 )"라는 문구가 뜹니다. 확인 부탁합니다. 어제 두가지 질문을 했었는데, 한가지는 해결됐습니다. 처짐에 대한 내용만 검토부탁합니다.
Answer
안녕하세요. 한길아이티입니다. 콘크리트 설계기준을 보시면 처짐의 검토시 기준이 되는 철근이 fy= 4000 kg/㎠ 입니다. fy= 4000 kg/㎠ 이외의 철근은 (0.43 + fy / 7000)식에 의해 보정해 주게 되어 있습니다. 콘크리트 설계기준 사용성 및 내구성편을 참조하시기 바랍니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | ACulvert | #268543 | Pile calculation report | 329 | 2026-09-28 |
| Answered | ACulvert | #268536 | Setting section changes in culvert | 174 | 2026-09-28 |
| Answered | ACulvert | #268524 | Design check not performed at wall center | 217 | 2026-09-27 |
| Answered | ACulvert | #268523 | Applying moving vehicle loads | 239 | 2026-09-27 |
| Answered | ACulvert | #268522 | Question about pile layout | 262 | 2026-09-23 |
| Answered | ACulvert | #268521 | Question about features | 130 | 2026-09-23 |
| Answered | ACulvert | #268510 | Question about joint check in Excel report output | 185 | 2026-09-22 |
| Answered | ACulvert | #268499 | Error in STM analysis of corner region | 144 | 2026-09-22 |
| Answered | ACulvert | #268471 | Launching the culvert program | 59 | 2026-09-18 |
| Answered | ACulvert | #268442 | All lines are displayed as dashed lines, what should I do? | 140 | 2026-09-17 |
| Answered | ACulvert | #268429 | Question about U-type underpass | 126 | 2026-09-17 |
| Answered | ACulvert | #268424 | Load position when applying railway loads to an underpass | 237 | 2026-09-17 |
| Answered | ACulvert | #268417 | Changing girder dimensions | 152 | 2026-09-17 |
| Answered | ACulvert | #268396 | Incorrect section check location for horizontal rebar | 184 | 2026-09-16 |
| Answered | ACulvert | #268376 | Question about segment settings for U-type retaining wall | 194 | 2026-09-15 |
| Answered | ACulvert | #268343 | Question about culvert drawing output | 129 | 2026-09-15 |
| Answered | ACulvert | #268337 | Inquiry about checking retaining-wall-type wing walls | 306 | 2026-09-14 |
| Answered | ACulvert | #268330 | About drawing output | 154 | 2026-09-14 |
| Answered | ACulvert | #268318 | Some blocks not displayed | 141 | 2026-09-14 |
| Answered | ACulvert | #268317 | Tank load for surcharge and moving loads | 342 | 2026-09-14 |