Skip to content
AnsweredACulvertQ&A #2257352005-01-12 15:06 · Views 124

Section check and illustration errors

계산서 단면검토 내용 : 첨부화일을 보면 제 1경간 지점부에서 H값이 140으로 되어있는데, 슬래브 두께가 110이고 헌치가 600X300이므로 +200이되어 총 130이 되는것이 맞지 않을런지요.. 출력 / 계산서 출력 : "계산서 삽도 보기"버튼을 누르면 계산서 삽도 가 없는 빈 공간만 보입니다. 보 및 기둥철근 입력 : 보와 기둥은 "설계검토"버튼을 눌러도 설계검토 내용이 뜨질 않습니다. 빠른 답변 부탁합니다.

Answer

안녕하세요. 한길아이티입니다. 1.계산서 단면검토 내용 : 첨부화일을 보면 제 1경간 지점부에서 H값이 140으로 되어있는데, 슬래브 두께가 110이고 헌치가 600X300이므로 +200이되어 총 130이 되는것이 맞지 않을런지요.. ==>오류사항을 확인하였습니다. 수정하여 패치에 반영하겠습니다. 2.출력 / 계산서 출력 : "계산서 삽도 보기"버튼을 누르면 계산서 삽도 가 없는 빈 공간만 보입니다. ==> 계산서는 계산서를 출력한 후에 같은 다이얼로그창에서 보이게 됩니다. 3. 보 및 기둥철근 입력 : 보와 기둥은 "설계검토"버튼을 눌러도 설계검토 내용이 뜨질 않습니다. ==> 빠른시일내에 적용하도록 하겠습니다. 감사합니다.

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredACulvert#268543Pile calculation report3292026-09-28
AnsweredACulvert#268536Setting section changes in culvert1742026-09-28
AnsweredACulvert#268524Design check not performed at wall center2172026-09-27
AnsweredACulvert#268523Applying moving vehicle loads2392026-09-27
AnsweredACulvert#268522Question about pile layout2622026-09-23
AnsweredACulvert#268521Question about features1302026-09-23
AnsweredACulvert#268510Question about joint check in Excel report output1852026-09-22
AnsweredACulvert#268499Error in STM analysis of corner region1442026-09-22
AnsweredACulvert#268471Launching the culvert program592026-09-18
AnsweredACulvert#268442All lines are displayed as dashed lines, what should I do?1402026-09-17
AnsweredACulvert#268429Question about U-type underpass1262026-09-17
AnsweredACulvert#268424Load position when applying railway loads to an underpass2372026-09-17
AnsweredACulvert#268417Changing girder dimensions1522026-09-17
AnsweredACulvert#268396Incorrect section check location for horizontal rebar1842026-09-16
AnsweredACulvert#268376Question about segment settings for U-type retaining wall1942026-09-15
AnsweredACulvert#268343Question about culvert drawing output1292026-09-15
AnsweredACulvert#268337Inquiry about checking retaining-wall-type wing walls3062026-09-14
AnsweredACulvert#268330About drawing output1542026-09-14
AnsweredACulvert#268318Some blocks not displayed1412026-09-14
AnsweredACulvert#268317Tank load for surcharge and moving loads3422026-09-14
Sign in to ask