Load calculation
2) 고정하중 ( 지하수가 없을 경우, α = 1.042 ≤ 1.15) - 표 층 : 0.05 × 2.30 = 0.115tonf/㎡ - 기 층 : 0.10 × 2.00 = 0.200tonf/㎡ - 보 조 기 층 : 0.20 × 2.00 = 0.400tonf/㎡ - 동상방지층 : 0.30 × 2.00 = 0.600tonf/㎡ - 토 사 : 0.34 × 1.90 = 0.646 tonf/㎡ ---------------------------------------- ∴ Total Wd1 = 1.961 tonf/㎡ ∴ Total Wd1 × α = 2.044 tonf/㎡ culvert 계산서에서 위와 같이 하중산정을 하는데 α값에 대한 근거를 잘 모르겠습니다. 다른 계산서에서는 α가 나오지 않는 경우도 있던데 어떤 항목을 체크해서 고려하지 않게 할수도 있을것 같던데요.... α에 대한 근거자료(책이 있으면 책제목)를 좀 알려주시기 바랍니다.
Answer
안녕하세요. 한길아이티입니다. 상재하중상세에서 상재하중의 설계기준을 도로설계요령을 선택했을시에만 계산에 고려됩니다. α값은 도로설계요령 제2권 토공및 배수편 P604에 산출근거가 나와있으니 참조하시기 바랍니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | ACulvert | #268543 | Pile calculation report | 329 | 2026-09-28 |
| Answered | ACulvert | #268536 | Setting section changes in culvert | 174 | 2026-09-28 |
| Answered | ACulvert | #268524 | Design check not performed at wall center | 217 | 2026-09-27 |
| Answered | ACulvert | #268523 | Applying moving vehicle loads | 239 | 2026-09-27 |
| Answered | ACulvert | #268522 | Question about pile layout | 262 | 2026-09-23 |
| Answered | ACulvert | #268521 | Question about features | 130 | 2026-09-23 |
| Answered | ACulvert | #268510 | Question about joint check in Excel report output | 185 | 2026-09-22 |
| Answered | ACulvert | #268499 | Error in STM analysis of corner region | 144 | 2026-09-22 |
| Answered | ACulvert | #268471 | Launching the culvert program | 59 | 2026-09-18 |
| Answered | ACulvert | #268442 | All lines are displayed as dashed lines, what should I do? | 140 | 2026-09-17 |
| Answered | ACulvert | #268429 | Question about U-type underpass | 126 | 2026-09-17 |
| Answered | ACulvert | #268424 | Load position when applying railway loads to an underpass | 237 | 2026-09-17 |
| Answered | ACulvert | #268417 | Changing girder dimensions | 152 | 2026-09-17 |
| Answered | ACulvert | #268396 | Incorrect section check location for horizontal rebar | 184 | 2026-09-16 |
| Answered | ACulvert | #268376 | Question about segment settings for U-type retaining wall | 194 | 2026-09-15 |
| Answered | ACulvert | #268343 | Question about culvert drawing output | 129 | 2026-09-15 |
| Answered | ACulvert | #268337 | Inquiry about checking retaining-wall-type wing walls | 306 | 2026-09-14 |
| Answered | ACulvert | #268330 | About drawing output | 154 | 2026-09-14 |
| Answered | ACulvert | #268318 | Some blocks not displayed | 141 | 2026-09-14 |
| Answered | ACulvert | #268317 | Tank load for surcharge and moving loads | 342 | 2026-09-14 |