Bracket check
브라켓 계산서를 보면 다음과 같은데 주인장철근량이 이상합니다. 3단이나 들어가고 각 단에 철근이 16가닥인데 사용철근은 158.88이나 됩니다. 실제로 d16-8ea의 철근량은 15.88인데 표기만 158.88로 되는것 같고 아래부분의 3단 표현도 오류인것 같습니다. 또 프로그램상에서 d16-8ea로 지정하면 OK가 되는데 실제로는 NG입니다.(최소철근량 16보다 약간 작아서 NG) ⑤ 주인장철근(As)의 산정 주인장철근의 단면적은 (Af + An)과 (2/3 Avf + An) 중 큰값을 취한다. → As = 6.815 ㎠ As(min) = 0.04 x (fck / fy) x b x d = 0.04 x (240 / 3000) x 100.000 x 50.000 = 16.000 ㎠ Use As = 158.880 ㎠ (철근도심 10.00 cm) 1단 : D16- 8.0EA + D16- 8.0EA , d1 = 10.00 cm 2단 : D16- 8.0EA + D16- 8.0EA , d2 = 10.00 cm 3단 : D16- 8.0EA + D16- 8.0EA , d3 = 10.00 cm Use As ≥ 6.815 ㎠, 16.000 ㎠ ∴ O.K
Answer
안녕하세요. 한길아이티입니다. acl파일을 올려주시면 검토후 조치하겠습니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | ACulvert | #268543 | Pile calculation report | 329 | 2026-09-28 |
| Answered | ACulvert | #268536 | Setting section changes in culvert | 174 | 2026-09-28 |
| Answered | ACulvert | #268524 | Design check not performed at wall center | 217 | 2026-09-27 |
| Answered | ACulvert | #268523 | Applying moving vehicle loads | 239 | 2026-09-27 |
| Answered | ACulvert | #268522 | Question about pile layout | 262 | 2026-09-23 |
| Answered | ACulvert | #268521 | Question about features | 130 | 2026-09-23 |
| Answered | ACulvert | #268510 | Question about joint check in Excel report output | 185 | 2026-09-22 |
| Answered | ACulvert | #268499 | Error in STM analysis of corner region | 144 | 2026-09-22 |
| Answered | ACulvert | #268471 | Launching the culvert program | 59 | 2026-09-18 |
| Answered | ACulvert | #268442 | All lines are displayed as dashed lines, what should I do? | 140 | 2026-09-17 |
| Answered | ACulvert | #268429 | Question about U-type underpass | 126 | 2026-09-17 |
| Answered | ACulvert | #268424 | Load position when applying railway loads to an underpass | 237 | 2026-09-17 |
| Answered | ACulvert | #268417 | Changing girder dimensions | 152 | 2026-09-17 |
| Answered | ACulvert | #268396 | Incorrect section check location for horizontal rebar | 184 | 2026-09-16 |
| Answered | ACulvert | #268376 | Question about segment settings for U-type retaining wall | 194 | 2026-09-15 |
| Answered | ACulvert | #268343 | Question about culvert drawing output | 129 | 2026-09-15 |
| Answered | ACulvert | #268337 | Inquiry about checking retaining-wall-type wing walls | 306 | 2026-09-14 |
| Answered | ACulvert | #268330 | About drawing output | 154 | 2026-09-14 |
| Answered | ACulvert | #268318 | Some blocks not displayed | 141 | 2026-09-14 |
| Answered | ACulvert | #268317 | Tank load for surcharge and moving loads | 342 | 2026-09-14 |