When applying intermediate columns and girders
- 10련 암거로 설계하였습니다. 1. 상부슬래브 주철근량 검토시 가끔 에러 메세지가 나올 때도 있고 안나올 때도 있습니다. 2. 상부거더 : joint No. 가 슬래브 중앙부 No.로 표시되어 있음.(joint 149) 3. 하중계산 값 w=46.928ton/m ??? 4. 또한, w=46.928x거더폭(0.7)을 곱해야 되는게 아닌지 ???? 검토 부탁합니다.
안녕하세요. 한길아이티입니다. 1. 상부슬래브 주철근량 검토시 가끔 에러 메세지가 나올 때도 있고 안나올 때도 있습니다. --> 확인해 보겠습니다. 2. 상부거더 : joint No. 가 슬래브 중앙부 No.로 표시되어 있음.(joint 149) --> 저희 프로그램에서는 평상시의 모델링과 지진시의 모델링 다르게 하여 해석을 수행하고 있습니다. 따라서 평상시와 지진시의 절점넘버와 부재넘버가 틀립니다. 문의 하신 사항은 지진시의 절점넘버를 보셨습니다. 평상시의 모델링의 거더상부의 절점넘버를 보시면 149가 맞습니다. 3. 하중계산 값 w=46.928ton/m ??? --> 부재력집계에 요약되어 나온 전단력은 위험단면에서의 전단력입니다. 거더에 작용하는 전단력은 shere 다이아그램에서 해당절점위치의 전단력을 확인해 보시기 바랍니다. 4. 또한, w=46.928x거더폭(0.7)을 곱해야 되는게 아닌지 ???? --> 단위미터당 기둥에 작용하는 축력을 확인하시면 해당절점에서 기둥에 작용하는 축력과 해당절점부의 좌우측 전단력의 합이 비슷하게 나오는걸 확인할 수 있습니다. 즉 기둥에 작용하는 축력만큼의 하중을 거더가 부담한다고 보면 되기 때문에 거더폭으로 곱하지 않습니다. 다만 기둥축력을 사용하지 않고 굳이 전단력을 사용하는 이유는 모델링상 절점부가 슬래브 축선에 위치하기 때문에 전단력의 합의 크기가 기둥축력보다 미소하게 크기 때문에 보다 더 불리한 경우를 고려하기 위함입니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | ACulvert | #268543 | Pile calculation report | 329 | 2026-09-28 |
| Answered | ACulvert | #268536 | Setting section changes in culvert | 174 | 2026-09-28 |
| Answered | ACulvert | #268524 | Design check not performed at wall center | 217 | 2026-09-27 |
| Answered | ACulvert | #268523 | Applying moving vehicle loads | 239 | 2026-09-27 |
| Answered | ACulvert | #268522 | Question about pile layout | 265 | 2026-09-23 |
| Answered | ACulvert | #268521 | Question about features | 130 | 2026-09-23 |
| Answered | ACulvert | #268510 | Question about joint check in Excel report output | 185 | 2026-09-22 |
| Answered | ACulvert | #268499 | Error in STM analysis of corner region | 144 | 2026-09-22 |
| Answered | ACulvert | #268471 | Launching the culvert program | 59 | 2026-09-18 |
| Answered | ACulvert | #268442 | All lines are displayed as dashed lines, what should I do? | 140 | 2026-09-17 |
| Answered | ACulvert | #268429 | Question about U-type underpass | 126 | 2026-09-17 |
| Answered | ACulvert | #268424 | Load position when applying railway loads to an underpass | 237 | 2026-09-17 |
| Answered | ACulvert | #268417 | Changing girder dimensions | 152 | 2026-09-17 |
| Answered | ACulvert | #268396 | Incorrect section check location for horizontal rebar | 184 | 2026-09-16 |
| Answered | ACulvert | #268376 | Question about segment settings for U-type retaining wall | 194 | 2026-09-15 |
| Answered | ACulvert | #268343 | Question about culvert drawing output | 129 | 2026-09-15 |
| Answered | ACulvert | #268337 | Inquiry about checking retaining-wall-type wing walls | 306 | 2026-09-14 |
| Answered | ACulvert | #268330 | About drawing output | 154 | 2026-09-14 |
| Answered | ACulvert | #268318 | Some blocks not displayed | 141 | 2026-09-14 |
| Answered | ACulvert | #268317 | Tank load for surcharge and moving loads | 342 | 2026-09-14 |