About shear rebar spacing and number of legs
ACULVERT를 사용하면서 전단철근 간격을 결정하는데 문제가 있어서 문의드립니다. 먼저 배력철근과 전단철근의 C.T.C를 독립적으로 정의해줄 수 없는지 궁금합니다. 그리고 전단철근의 표준배치간격을 CTC200으로 하고 전단철근 설정에서 주철근을 2개씩 감싸는 것으로 선택하고 전단철근입력에서 전단철근을 200씩 배치되도록 입력하였습니다. 그런데 출력된 결과를 보면 상,하부 슬래브의 경우, 전단철근의 다리수가 4개, CTC가 200cm으로 출력되고 벽체의 경우 전단철근의 다리수가 4개, CTC가 20cm으로 출력됩니다. 전단철근의 다리수는 어떻게 산정되는 것이며 슬래브 CTC가 200cm가 나온것은 오류인듯 싶은데 입력상의 오류인지 아니면 프로그램 내의 오류인지 알려주십시오. 참고로 입력 data를 첨부하여 올립니다.
안녕하세요. 한길아이티입니다. 배력철근의 C.T.C와 전단철근의 C.T.C는 표준배치간격의 입력에서 일반적으로 가장 많이 쓰이는 배근형태로서 C.T.C가 종속적으로 입력되고 있습니다. 하지만 그 밑의 셀서식의 입력에서는 구간별 간격과 갯수를 입력하여 배력철근과 전단철근이 별개의 C.T.C로서 입력이 가능하게 되어 있습니다. 전단철근요약표에 나온 ctc(여기서 ctc는 전단철근의 간격으로서 계산상의 표기는 s입니다.)가 200으로 표기된것은 출력표기상의 오류입니다. 표기오류는 다음패치에 적용하겠습니다. 내부적인 프로그램의 코딩에서는 20cm로 맞게 되어 있습니다. 전단철근의 다리수는 주철근의 간격이 12.5cm 이고 두개씩 감는다고 하였으니 25cm에 전단철근이 하나가 들어갑니다. 따라서 단위미터당 들어가는 전단철근의 수는 2개이고1개당의 다리수는 2개이므로 4개가 맞습니다. 잘 이해가 안 가시면 배근도의 평면도상에 한번 그려보시기 바랍니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | ACulvert | #268543 | Pile calculation report | 329 | 2026-09-28 |
| Answered | ACulvert | #268536 | Setting section changes in culvert | 174 | 2026-09-28 |
| Answered | ACulvert | #268524 | Design check not performed at wall center | 217 | 2026-09-27 |
| Answered | ACulvert | #268523 | Applying moving vehicle loads | 239 | 2026-09-27 |
| Answered | ACulvert | #268522 | Question about pile layout | 265 | 2026-09-23 |
| Answered | ACulvert | #268521 | Question about features | 130 | 2026-09-23 |
| Answered | ACulvert | #268510 | Question about joint check in Excel report output | 185 | 2026-09-22 |
| Answered | ACulvert | #268499 | Error in STM analysis of corner region | 144 | 2026-09-22 |
| Answered | ACulvert | #268471 | Launching the culvert program | 59 | 2026-09-18 |
| Answered | ACulvert | #268442 | All lines are displayed as dashed lines, what should I do? | 140 | 2026-09-17 |
| Answered | ACulvert | #268429 | Question about U-type underpass | 126 | 2026-09-17 |
| Answered | ACulvert | #268424 | Load position when applying railway loads to an underpass | 237 | 2026-09-17 |
| Answered | ACulvert | #268417 | Changing girder dimensions | 152 | 2026-09-17 |
| Answered | ACulvert | #268396 | Incorrect section check location for horizontal rebar | 184 | 2026-09-16 |
| Answered | ACulvert | #268376 | Question about segment settings for U-type retaining wall | 194 | 2026-09-15 |
| Answered | ACulvert | #268343 | Question about culvert drawing output | 129 | 2026-09-15 |
| Answered | ACulvert | #268337 | Inquiry about checking retaining-wall-type wing walls | 306 | 2026-09-14 |
| Answered | ACulvert | #268330 | About drawing output | 154 | 2026-09-14 |
| Answered | ACulvert | #268318 | Some blocks not displayed | 141 | 2026-09-14 |
| Answered | ACulvert | #268317 | Tank load for surcharge and moving loads | 342 | 2026-09-14 |