Shoe EL looks wrong
교좌받침 슈의 EL 이상하게 나옵니다. 검토 부탁드립니다. 시점부 교대의 센터에서 왼쪽 첫번째 슈의 EL의 경우 8.251-1.5/2*0.02(횡방향)-0.5*0.003(종방향)-0.04(포장)-0.3(바닥판)-0.7(빔)-0.4(받침부형하공간)+0.25(받침블록높이)=7.0445가 나옵니다. APIER상에서는 7.041가 나오는데 차이가 있습니다. 답변 부탁드립니다.(횡단구배 -0.2%,종단 구배는 -0.3%입니다)
Answer2006-10-25 13:35
안녕하세요. 한길아이티입니다. 교량받침중심이므로 바닥판두께가 0.3이 아니라 0.303입니다. 자세한 부분은 도면의 EL산출근거도를 확인하시면 됩니다. 감사합니다.
Follow-up2006-10-25 15:24
수고 하십니다. APIER를 보시면 슬래브 제원입력을 300mm로 입력하였습니다. 어떻게 하여 303으로 계산되는지 확인 부탁합니다. >>안녕하세요. 한길아이티입니다. 교량받침중심이므로 바닥판두께가 0.3이 아니라 0.303입니다. 자세한 부분은 도면의 EL산출근거도를 확인하시면 됩니다. 감사합니다.
Answer2006-10-25 15:44
안녕하세요. 한길아이티입니다. 300을 입력한것은 맞지만 기준위치가 거더상부폭끝단입니다. 따라서 슈위치는 상부폭원중간에 있으므로 다음과 같이 됩니다. 300+3(=300/2*0.02)=303 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #200777 | (Urgent) Abutment wall main rebar looks wrong | 85 | 2006-10-26 |
| Answered | AAbutPier | #200776 | Error generating abutment reinforcement drawing (1) | 50 | 2006-10-26 |
| Answered | AAbutPier | #200772 | Errors keep occurring | 30 | 2006-10-26 |
| Answered | AAbutPier | #200771 | Applying bundled rebar | 59 | 2006-10-26 |
| Answered | AAbutPier | #200764 | Shoe EL looks wrong · Currently viewing | 32 | 2006-10-25 |
| Answered | AAbutPier | #200761 | How to consider uplift pressure and buoyancy for piers | 40 | 2006-10-25 |
| Answered | AAbutPier | #200754 | Wall main rebar comes out incorrectly | 30 | 2006-10-25 |
| Answered | AAbutPier | #200753 | Parapet in abutment front view | 31 | 2006-10-25 |
| Answered | AAbutPier | #200752 | Abutment reinforcement drawing not generated correctly | 57 | 2006-10-25 |
| Answered | AAbutPier | #200740 | When checking foundation overturning... | 35 | 2006-10-24 |
| Answered | AAbutPier | #200734 | About rebar names.. | 20 | 2006-10-24 |
| Answered | AAbutPier | #200732 | Aligning shoe bearing centerlines | 22 | 2006-10-24 |
| Answered | AAbutPier | #200749 | Wind load on elastomeric bearings and normal temperature load | 74 | 2006-10-24 |
| Answered | AAbutPier | #200746 | Plastic design | 49 | 2006-10-24 |
| Answered | AAbutPier | #200743 | Section check won't run | 27 | 2006-10-24 |
| Answered | AAbutPier | #200738 | Can differing road and bridge cross-section dimensions be adjusted? | 38 | 2006-10-24 |
| Answered | AAbutPier | #200733 | When two alignments overlap at the abutment... | 31 | 2006-10-24 |
| Answered | AAbutPier | #200728 | Abutment foundation main rebar design check doesn't work | 23 | 2006-10-24 |
| Answered | AAbutPier | #200723 | About pedestrian bridge piers | 36 | 2006-10-24 |
| Answered | AAbutPier | #200722 | Adjusting substructure width to superstructure width | 20 | 2006-10-23 |