Follow-up to *** question
[개인정보]번에 질문한 [개인정보] 방향은 지점1이 교대이고 지점2가 교각이라서, brx를 불러드린 다음에 지점2를 말씀하신대로 교각으로 수정하여 내진해석이 원활히 수행되었습니다. 그런데 대칭형태의 [개인정보]방향은 지점1이 교각이고, 지점2가 교대라서, brx를 불러드린 다음에 같은 방법으로 지점1을 교대에서 교각으로 고치면 내진해석 단면입력에서 거더가 사라지고, 내진해석 모델링을 수행하면 에러가 발생합니다.. 대칭형인데 한쪽은 되고 한쪽은 왜 안되는지 답답하네요... 이게 마지막 질문이기를 기대하면서 부탁드립니다.
Answer
안녕하세요. 한길아이티입니다. [일반입력]-[지점각도입력]에 보시면 시점위치인 교각위치에 시점부 유간의 값이 없습니다. brx를 직접 불러 들여본 바 "100"의 유간값이 있습니다. 시점의 위치에 유간을 입력하여 주시면 됩니다. 수정후에 확인한 파일을 첨부하니 참조하시기 바랍니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #199091 | File shows an error | 24 | 2006-06-26 |
| Answered | AAbutPier | #199089 | Outer end length comes out as 0 | 46 | 2006-06-24 |
| Answered | AAbutPier | #199084 | Please review | 32 | 2006-06-24 |
| Answered | AAbutPier | #199080 | Setting bridge bearing direction | 49 | 2006-06-24 |
| Answered | AAbutPier | #199077 | Follow-up to my phone call (water flow pressure) | 42 | 2006-06-23 |
| Answered | AAbutPier | #199072 | Quantity work items do not match | 49 | 2006-06-23 |
| Answered | AAbutPier | #199088 | Question about cast-in-place piles | 51 | 2006-06-23 |
| Answered | AAbutPier | #199081 | *** *** | 49 | 2006-06-23 |
| Answered | AAbutPier | #199064 | Handling step in coping | 26 | 2006-06-23 |
| Answered | AAbutPier | #199056 | Foundation safety check error? | 36 | 2006-06-22 |
| Answered | AAbutPier | #199053 | Sending the file below | 35 | 2006-06-22 |
| Answered | AAbutPier | #199052 | Seismic modeling | 63 | 2006-06-22 |
| Answered | AAbutPier | #199050 | Unbraced length of columns | 98 | 2006-06-22 |
| Answered | AAbutPier | #199042 | Placing beams by coordinates | 34 | 2006-06-22 |
| Answered | AAbutPier | #199041 | Runtime error when printing the structural calculation report | 46 | 2006-06-22 |
| Answered | AAbutPier | #199047 | Applying the tangential direction to pier coping | 21 | 2006-06-21 |
| Answered | AAbutPier | #199033 | Plastic design | 33 | 2006-06-21 |
| Answered | AAbutPier | #199030 | Two questions | 31 | 2006-06-21 |
| Answered | AAbutPier | #199021 | Under-girder clearance at the bearing seat | 20 | 2006-06-21 |
| Answered | AAbutPier | #199017 | Follow-up to *** question · Currently viewing | 21 | 2006-06-20 |