Checking pile member forces in plastic design
안녕하세요.. 소성설계에서 말뚝 단면력 체크시.. 기둥하단의 모멘트와 수평력에 대한 모멘트의 합을 응답수정계수(1.5)로 나눠 산정되야될 것 같은데요.. 프로그램상에서는 수평력에 대한 모멘트는 응답수정계수를 고려하지 않고 합산된 것 같습니다.. 안전측으로 너무 과다하게 설계된것 같아 문의드립니다.. 검토바랍니다..
Answer
안녕하세요. 한길아이티입니다. 기둥하단의 모멘트는 소성힌지로 인한 응답수정계수를 고려합니다. 허나 수평력에 의해 기초하부에 발생하는 모멘트의 경우는 소성힌지를 통해 전달되는 힘이 아니므로 직접 기초하부에 작용하게 됩니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #193969 | Approach slab structural calculation report? | 45 | 2005-08-13 |
| Answered | AAbutPier | #193947 | Left wing wall | 24 | 2005-08-12 |
| Answered | AAbutPier | #193936 | Bridge bearing details? | 23 | 2005-08-12 |
| Answered | AAbutPier | #193955 | About recommendations for column ties | 30 | 2005-08-12 |
| Answered | AAbutPier | #193953 | About the moment magnification factor | 42 | 2005-08-12 |
| Answered | AAbutPier | #193943 | Wing wall | 24 | 2005-08-12 |
| Answered | AAbutPier | #193935 | Coping step height | 26 | 2005-08-12 |
| Answered | AAbutPier | #193923 | Pier modeling error | 17 | 2005-08-12 |
| Answered | AAbutPier | #193922 | Concrete blocks and modeling | 30 | 2005-08-12 |
| Answered | AAbutPier | #193932 | Applying bearings | 5 | 2005-08-11 |
| Answered | AAbutPier | #193931 | About the P-M interaction diagram in the report | 31 | 2005-08-11 |
| Answered | AAbutPier | #193928 | Load acting at the center of the foundation | 14 | 2005-08-11 |
| Answered | AAbutPier | #193920 | About buoyancy | 18 | 2005-08-11 |
| Answered | AAbutPier | #193919 | About the answer to 16609 | 53 | 2005-08-11 |
| Answered | AAbutPier | #193914 | Girder layout | 46 | 2005-08-11 |
| Answered | AAbutPier | #193913 | Question about the answer to 16607 | 29 | 2005-08-11 |
| Answered | AAbutPier | #193894 | Question about entering pier sections | 45 | 2005-08-11 |
| Answered | AAbutPier | #193893 | Please check errors in modeling analysis | 47 | 2005-08-11 |
| Answered | AAbutPier | #193890 | Missing rebar in strengthened zone | 42 | 2005-08-11 |
| Answered | AAbutPier | #193905 | Checking pile member forces in plastic design · Currently viewing | 35 | 2005-08-10 |