Skip to content
AnsweredAWallQ&A #2629232025-10-27 18:03 · Views 18

주철근 2단배근 도면출력 안되는 문제

단위M로 도면을 뽑는데 벽체는 1단, 기초는 2단으로 배근하였는데 도면에는 2단이 표현되지 않습니다. 옵션도 선택했는데 확인 한번 부탁드립니다.

Attached images

Attached images 1Attached images 3

1 attached file · Only the person who posted and our support staff can open them.

Sign in if this is your post

Answer

안녕하세요. 한길아이티입니다. 2단 구조도가 출력되도록 수정작업을 진행하였습니다. 최신 패치를 받아보시기 바랍니다. 감사합니다.

Answer

패치 감사합니다. 그런데 오류가 있어서 재문의 드립니다. 일단 저판 구조도는 2단배근 구조도가 나오는데, 벽체 구조도는 2단배근이 출력이 안됩니다. 그리고, 저판에서 2단배근을 하여 출력할 때, 2단배근 구조도의 치수선이 1단배근 구조도의 치수선을 따라가는 오류가 있는 것 같습니다. 사진을 보면 2단배근 저판 구조도의 치수선이 실제 구조도와 맞지 않습니다. 사진과 전산파일 첨부하오니 확인 부탁드리겠습니다. 안녕하세요. 한길아이티입니다. 답변이 늦어 죄송합니다. 2단 구조도 도면 오류는 수정하였습니다. 최신 패치를 받아보시기 바랍니다. 감사합니다.

Attached images

Attached images 4Attached images 5

1 attached file · Only the person who posted and our support staff can open them.

Sign in if this is your post

More in this list

StatusProductNo.TitleViewsDate
AnsweredAWall#268515awall 휨응력 n.g2312026-09-22
AnsweredAWall#268344저판 경사지게 출력1902026-09-15
AnsweredAWall#268314배근 기호가 출력이 안됩니다1162026-09-14
AnsweredAWall#268266시행쐐기법 성토부설정1832026-09-08
AnsweredAWall#268205계산서 출력관련 질문 있습니다.1872026-09-04
AnsweredAWall#268192ㅣ형 옹벽 기초 배력근 철근 배치 관련하여 질문 사항이 있습니다.1272026-09-03
AnsweredAWall#268150철근 재료표 출력782026-09-02
AnsweredAWall#268062옹벽구간설정관련 문의782026-08-31
AnsweredAWall#268029중력식옹벽 뒷채움재 하중812026-08-27
AnsweredAWall#267910수량산출 확인 부탁드립니다.1342026-08-21
AnsweredAWall#267870L형옹벽 배면 성토부 설정 - 설정892026-08-19
AnsweredAWall#267785전단 철근 배치 오류 확인 바랍니다.882026-08-13
AnsweredAWall#267778옹벽 벽체 최소전단철근 관련 사항1382026-08-13
AnsweredAWall#267719기초의 배력철근 배치가 안보여요1022026-08-12
AnsweredAWall#267666옹벽 단면 검토시 헌치를 고려 검토 여부1772026-08-10
AnsweredAWall#267659석축 검토시 단면 설정 및 석축 재료 제원 설정1162026-08-10
AnsweredAWall#267579설치관련-지정되지않은 오류입니다.652026-08-06
AnsweredAWall#267504배력근 간격 문의2172026-08-04
AnsweredAWall#267494옹벽 수량관련 질문이 있습니다.1482026-08-03
AnsweredAWall#267484평면도 단면관련2072026-08-03
Sign in to ask