Skip to content
AnsweredARcBridgeQ&A #1715922022-09-22 19:47 · Views 411

허용연직지지력 및 STM 해석 문의

1. 계산서보면 12.2 2) 지반의 허용연직지지력 에 별첨자료 참조 라고 나오는데 별첨자료가 어디있는지 모르겠습니다. 2. 본체 강도를 fck = 30 으로 바꿔놨는데, STM 브라켓 해석에서는 본체강도가 35로 나옵니다.

Attached images 1Attached images 2
Answer

안녕하세요. 한길아이티입니다. 1. 첨부 파일의 경우 허용지지력 산정값은 사용자입력으로 적용하였는데요. 사용자 입력 적용시 프로그램내에서는 허용지지력 산정값의 근거를 출력하지 않기 때문에 별첨자료 첨부라고 표기하였으며 설계자가 직접 허용지지력 산정근거를 첨부하셔야 합니다. 2. 설계조건 및 설계하중이 변경되는 경우 STM해석에서 모델링을 재산정 하여야 합니다. 브라캇 STM에서 [모델링 초기화]를 통해 모델링을 다시 생성하여 주신 후 확인하여 주시기 바랍니다. 감사합니다.

Attached images 3

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredARcBridge#268534재료표표기오류1702026-09-28
AnsweredARcBridge#268460생태교량 날개벽 토피고 2.0m 하중 고려2012026-09-18
AnsweredARcBridge#268436프로그램이 렉이 너무 걸리는 것 같습니다.1152026-09-17
AnsweredARcBridge#268385지진시 하중산정1152026-09-15
AnsweredARcBridge#268383기초부 설정1432026-09-15
AnsweredARcBridge#268338도면출력 오류852026-09-14
AnsweredARcBridge#268313날개벽 3D plate 해석2172026-09-12
AnsweredARcBridge#268294모델링 사거리 해석1552026-09-10
AnsweredARcBridge#268263철근 배근시 프로그램 렉 관련 문의드립니다.1372026-09-08
AnsweredARcBridge#268220도면 출력 오류1402026-09-04
AnsweredARcBridge#268218말뚝길이 관련1652026-09-04
AnsweredARcBridge#268206구조계산서 관련 문의드립니다.1122026-09-04
AnsweredARcBridge#268159설계기준에 따른 날개벽 수정(추가) 요청 드립니다.2082026-09-03
AnsweredARcBridge#268158전단검토 관련 문의1412026-09-02
AnsweredARcBridge#268124철근 마킹 오류972026-09-02
AnsweredARcBridge#2681152d frame 해석과 3d plate 해석의 단면력 차이2352026-09-01
AnsweredARcBridge#268102단면력 집계 오류712026-09-01
AnsweredARcBridge#268074연속 경사 교각 라멘교2 적용 문의1092026-08-31
AnsweredARcBridge#268056난간기초(방호벽) 철근 및 일반수량902026-08-29
AnsweredARcBridge#268033구조도 출력 오류1192026-08-28
Sign in to ask