Skip to content
AnsweredARcBridgeQ&A #1692892022-04-22 19:05 · Views 370

일반수량 산출시 설정했던 구조물 크기보다 약 25mm 작게 수량 산출이 됩니다.

질문1. 일반수량 산출시 설정했던 구조물 크기보다 약 25mm 작게 수량 산출이 됩니다. 옵션에서 만지는게 있는지 확인해봤지만 찾지 못해서 문의글 남깁니다. 질문2. 철근가공조립에서 구조물에 따라 간단 보통 복잡 으로 나뉘는데 이걸 하나로 통일하는 옵션이 있다면 알려주세요. 감사합니다.

Attached images 1
Answer

안녕하세요. 한길아이티입니다. 1. 첨부파일의 경우 편경사로 인해 벽체 높이가 변화되는 형태의 구조물이기 때문에 벽체 높이를 평균내어 수량산출시 벽체높이를 재산정합니다. 2. 철근가공조립은 분리하지 않고 표기하는 기능은 지원하지 않고 있습니다. 감사합니다.

Attached images 2

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredARcBridge#268534재료표표기오류1702026-09-28
AnsweredARcBridge#268460생태교량 날개벽 토피고 2.0m 하중 고려2012026-09-18
AnsweredARcBridge#268436프로그램이 렉이 너무 걸리는 것 같습니다.1152026-09-17
AnsweredARcBridge#268385지진시 하중산정1152026-09-15
AnsweredARcBridge#268383기초부 설정1432026-09-15
AnsweredARcBridge#268338도면출력 오류852026-09-14
AnsweredARcBridge#268313날개벽 3D plate 해석2182026-09-12
AnsweredARcBridge#268294모델링 사거리 해석1552026-09-10
AnsweredARcBridge#268263철근 배근시 프로그램 렉 관련 문의드립니다.1372026-09-08
AnsweredARcBridge#268220도면 출력 오류1402026-09-04
AnsweredARcBridge#268218말뚝길이 관련1652026-09-04
AnsweredARcBridge#268206구조계산서 관련 문의드립니다.1122026-09-04
AnsweredARcBridge#268159설계기준에 따른 날개벽 수정(추가) 요청 드립니다.2092026-09-03
AnsweredARcBridge#268158전단검토 관련 문의1412026-09-02
AnsweredARcBridge#268124철근 마킹 오류982026-09-02
AnsweredARcBridge#2681152d frame 해석과 3d plate 해석의 단면력 차이2352026-09-01
AnsweredARcBridge#268102단면력 집계 오류712026-09-01
AnsweredARcBridge#268074연속 경사 교각 라멘교2 적용 문의1122026-08-31
AnsweredARcBridge#268056난간기초(방호벽) 철근 및 일반수량902026-08-29
AnsweredARcBridge#268033구조도 출력 오류1192026-08-28
Sign in to ask