Skip to content
AnsweredARcBridgeQ&A #1679452022-01-16 21:36 · Views 407

도면출력시 벽체구조도 전면 및 배면 반반 출력 안됨.

첨부 파일과 같이 도면 생성시 시점측 벽체는 전면 및 배면이 각각 출력되고 종점측 벽체는 전면 및 배면이 함께 출력되어 나옴 전 시점측도 종점측 처럼 전면 및 배면이 함께 출력되어 나오길 바랍니다 도면 환경 설정에서 벽체 구조도의 외측, 내측을 분리해서 표현을 체크하지 않았는데 이렇고 나오네요 조치 부탁 드리겠습니다

Attached images 1Attached images 2
Answer

안녕하세요. 한길아이티입니다. 첨부 파일은 시점부에 가각이 입력되어 있는것으로 확인되는데요. 선형에 곡선, 가각이 있는경우, 확폭인 경우에는 전면과 배면을 하나로 표현할 수 없기 때문에 자동으로 분리되어 표현됩니다. 감사합니다.

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredARcBridge#268534재료표표기오류1702026-09-28
AnsweredARcBridge#268460생태교량 날개벽 토피고 2.0m 하중 고려2022026-09-18
AnsweredARcBridge#268436프로그램이 렉이 너무 걸리는 것 같습니다.1152026-09-17
AnsweredARcBridge#268385지진시 하중산정1152026-09-15
AnsweredARcBridge#268383기초부 설정1442026-09-15
AnsweredARcBridge#268338도면출력 오류862026-09-14
AnsweredARcBridge#268313날개벽 3D plate 해석2182026-09-12
AnsweredARcBridge#268294모델링 사거리 해석1552026-09-10
AnsweredARcBridge#268263철근 배근시 프로그램 렉 관련 문의드립니다.1372026-09-08
AnsweredARcBridge#268220도면 출력 오류1402026-09-04
AnsweredARcBridge#268218말뚝길이 관련1652026-09-04
AnsweredARcBridge#268206구조계산서 관련 문의드립니다.1132026-09-04
AnsweredARcBridge#268159설계기준에 따른 날개벽 수정(추가) 요청 드립니다.2092026-09-03
AnsweredARcBridge#268158전단검토 관련 문의1412026-09-02
AnsweredARcBridge#268124철근 마킹 오류982026-09-02
AnsweredARcBridge#2681152d frame 해석과 3d plate 해석의 단면력 차이2362026-09-01
AnsweredARcBridge#268102단면력 집계 오류732026-09-01
AnsweredARcBridge#268074연속 경사 교각 라멘교2 적용 문의1132026-08-31
AnsweredARcBridge#268056난간기초(방호벽) 철근 및 일반수량902026-08-29
AnsweredARcBridge#268033구조도 출력 오류1192026-08-28
Sign in to ask