Skip to content
AnsweredRcGhostQ&A #2564792024-08-26 11:24 · Views 91

해석결과 설계검토시 오류 발생 확인 부탁드립니다.

해석결과의 설계검토 시 휨,압축 검토의 결과표에서 오류가 발생한 듯 합니다. 확인 부탁드리겠습니다.

Attached images

Attached images 3

1 attached file · Only the person who posted and our support staff can open them.

Sign in if this is your post

Answer

안녕하세요. 한길아이티입니다. Y방향에서의 판정은 모멘트확대계수가 1.4 를 초과하여 N.G로 판정되었습니다. 다만 Y방향 부재력이 "-"값인 경우 단면검토에서 계산결과과 표기되지 않는 오류가 확인되어 수정작업을 진행하였습니다. 패치후 확인하시기 바랍니다. 감사합니다.

Attached images 2

More in this list

StatusProductNo.TitleViewsDate
AnsweredRcGhost#268092RCGhost FE(free) 설치 관련 문의802026-09-01
AnsweredRcGhost#268004코벨 엑셀 출력시 생성파일 정렬 수정 필요합니다.1112026-08-26
AnsweredRcGhost#267499파일기초 단면계산 결과 샘플요청1272026-08-03
AnsweredRcGhost#267389STM 해석시1042026-07-29
AnsweredRcGhost#266925RCghost 설치관련 오류742026-07-03
AnsweredRcGhost#266889말뚝기초 설계관련982026-07-02
AnsweredRcGhost#266882계산서 출력882026-07-02
AnsweredRcGhost#266642코벨(브래킷) 강도설계법 적용높이 관련752026-06-22
AnsweredRcGhost#266450RcGhost Design 설치 오류 문의입니다.1522026-06-10
AnsweredRcGhost#265905프로그램 오류(dll을 찾을수 없습니다.)1652026-05-13
AnsweredRcGhost#265856파일 다운로드 실패가 뜹니다602026-05-11
AnsweredRcGhost#265256RcGhost Design를 설치하였는데 오류로 인해 작동하지 않습니다.1262026-04-06
AnsweredRcGhost#265133Excel 출력 오류982026-03-30
AnsweredRcGhost#264722엑셀 출력 오류 사항 확인 부탁드립니다.1382026-03-04
AnsweredRcGhost#263954화면 겹침 해결 부탁드립니다.782026-01-08
AnsweredRcGhost#263799확대 모멘트 산정 시 M2값에 대한 질문입니다.1252025-12-23
AnsweredRcGhost#262982설계단면 문의입니다.1082025-10-29
AnsweredRcGhost#261706거더 균열폭 검토712025-08-06
AnsweredRcGhost#261693절점부 검토시 인장응력(ftmax) 구하는 공식 수정이 필요할 듯 보입니다.1132025-08-06
AnsweredRcGhost#261254프로그램 오류가 뜹니다.932025-07-10
Sign in to ask